![]() We can confidently state that the best material for this purpose is polycarbonate. Here is a diagram comparing materials and their resistance to chlorine. For these reasons, lighting installations need to be both resistant and durable. In addition to this, the basic configuration of pools tends to make lighting system maintenance a difficult and costly job. Chlorine vapours, which accelerate corrosion of materials, also have a rather high level. The level of humidity is usually quite high (approximately 50 to 60%) in indoor pool facilities. The lifespan of luminaires installed in this setting can be affected. Pools are known to be highly humid and corrosion-causing environments. 4) Luminaires that are Resistant to Chlorine and a Humid Environment Conversely, a rating above 30 indicates a high degree of brightness. Typically, a UGR measuring less than 10 is of no consequence. The UGR is a method used to estimate the glare factor, as defined by the International Commission on Illumination. It is important to examine the Unified Glare Rating (UGR) of chosen lighting products. The issue can also be resolved by setting up a system that projects light both upwards and downwards. Reflection can be toned down with the installation of luminaires on the perimeter of the pool and on the terrace. The glare can cause discomfort or even dizziness to the pool attendants. Particular attention needs to be paid to the reflection of light on the pool’s surface and on its surroundings. One of the major concerns regarding pool lighting is the quality of light, as it affects the safety of people who use the pool as well as those responsible for its upkeep. 680) states the requirements regarding pool lighting.ģ) Understanding the Danger caused by the Reflection of Water In addition, the chart below, taken from the National Electrical Code of the National Fire Protection Association (NFPA) (NFPA art. Swimming Pool Luminaires and Saltwater Pools by Underwriters Laboratories (UL).National Pool Safety Standards by the Lifesaving Society.Code de la construction du Québec by the Régie du bâtiment.The following is a number of standards that administrators and builders of indoor pool facilities may find useful to select or modify a pool installation’s lighting system: ![]() However, many installations (even new ones) fail to meet these regulations. In Quebec, the construction code issued by the Régie du bâtiment du Québec is more demanding than its provincial counterparts: it insists on the use of 300 lux. This includes the bottom of the pool as well. There should be sufficient lighting so that every surface of the installation is clearly visible. In most cases, the basic installation calls for a minimum of 200 lux over the surface of the pool, both during the day and at night. ![]() However, there are no official standards in effect in this country. Most provinces and territories in Canada have published guidelines with respect to the maintenance and operation of pool facilities. This is because a number of activities require certain standards to ensure meeting safety standards.īelow are a few of the classifications for pool usage and designated lighting recommendations:Ģ) Lighting Standards and Installation Recommendations Is this pool situated in a condominium or a hotel? Will swim meets be held in this pool? Will they be televised? Will swimming or diving lessons be given there? Will the pool serve as a water polo facility or leisure swim centre? It is essential to specify to what end the pool will be used prior to selecting the lighting system needed. 1) Assessing the End-Use of the Pool to Select Appropriate Lighting Read on to learn more about the challenges and solutions that indoor pool lighting faces. Finally, both the resistance and durability of selected luminaries require thorough compliance. ![]() Further, we must address the safety dimensions for swimmers and pool staff. We further need to study the rules and regulations governing lighting in such an environment. Initially, we need to establish the end-use of the pool. Any installation of this type is a multi-faceted one and requires careful examination of several features prior to its lighting arrangement’s selection or refurbishing. Safety, resistance, durability: three required qualities of any indoor pool lighting system. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |